Glen-Gery Brickwork Design Guide -- Papercut Facebrick Specifications

Where to buy: Quick Links:
Extruded Facebrick
Rolled Edge Facebrick
Molded Facebrick
Handmade Facebrick
Papercut Facebrick
Tumbled Facebrick
1/2" Thin Brick
3/4" Thin Brick
1" Thin Brick
Glazed Facebrick
Extruded Paver
Molded Paver
Tumbled Paver
Repressed Chamfered Paver

Unit Specifications Glen-Gery papercut brick are manufactured to conform to the ASTM International Standard Specification C 216, Grade SW and all grades of ASTM International C 62.
Dimensional Tolerances Glen-Gery papercut brick are manufactured to achieve specific dimensional tolerances. The dimensional tolerances of the product are intended to be within the requirements of ASTM International C 216, Type FBS. The tolerances for various unit dimensions are typically: Thickness, +/-1/8"; Height, +/-3/32"; Length over 6" up to 8", +/-1/4", over 8", +/-5/16". Generally, the product ordered will contain a number of units which are under or over the specified dimension.
Finishes Glen-Gery papercut brick are available in a wirecut, sand finish.

Brick and Mortar Quantities
Nominal 3/8 Inch Mortar Joints
Descriptive Unit Size Unit
Size
 (thickness x height x length)		 Unit
Weight
(lb/unit)		 Vertical Coursing in courses
per inches		 Units per Square Foot Cubic Foot per Square Foot Quantities of Mortar per 1000 Units
without Collar Joint with Collar Joint without Collar Joint with Collar Joint
Standard Modular 3-5/8" x 2-1/4" x 7-5/8" 3.6 3 courses per 8 ins. 6.75 0.059 0.122 8.77 18.03
Engineer 3-5/8" x 2-3/4" x 7-5/8" 4.6 5 courses per 16 ins. 5.37 0.054 0.117 10.07 21.70
Queen 3" x 2-3/4" x 7-5/8" 3.8-4.0 5 courses per 16 ins. 5.63 0.045 0.108 8.00 19.18
King 2-3/4" x 2-3/4" x 9-5/8" 4.5 5 courses per 16 ins. 4.50 0.052 0.115 11.60 25.49
These values are actual quantities and must be increased for waste and any possible construction requirements which may necessitate additional quantities.

Units per Linear Foot in Various Positions
Nominal 3/8 Inch Mortar Joints
Descriptive Unit Size Unit
Size
 (thickness x height x length)		 Unit Weight
Range
(lb/unit)		 Stretcher Rolock Soldier Header
Standard Modular 3-5/8" x 2-1/4" x 7-5/8" 3.6 1.50 4.50 4.50 3.00
Engineer 3-5/8" x 2-3/4" x 7-5/8" 4.6 1.43 3.75 3.75 3.00
Queen 3" x 2-3/4" x 7-5/8" 3.8-4.0 1.43 3.75 3.75 3.56
King 2-3/4" x 2-3/4" x 9-5/8" 4.5 1.20 3.75 3.75 3.00