| Unit Specifications |
Glen-Gery tumbled paving brick are manufactured to conform to the
ASTM International Standard
Specification C 902, Class SX.
|
| Dimensional Tolerances |
Glen-Gery tumbled paving brick are manufactured to achieve
dimensional tolerances within the requirements of ASTM International C 216, Type
FBS. The tolerances for various unit dimensions are typically: 3"
and under,
 1/8"; over 3" to 4",
3/16"; over 5" to 8",
1/4". Generally, the product ordered will contain a few units which are
over or under the specified dimension.
|
| Finishes |
Glen-Gery tumbled paving brick are manufactured with a wire cut finish on both beds.
This texture has been intentionally distressed to achieve a desired
appearance.
|
Paving Brick and Mortar Quantities
Nominal 3/8 Inch Mortar & Bed Joints (mortar installation)
1-1/2" sand, 4" gravel (mortarless installation) |
| Descriptive Unit Size |
Unit
Size
(width x length x height) |
Unit
Weight
(lb/unit) |
Units per Square Foot |
Cubic ft. Mortar per Square Foot |
Mortarless Bed Material per Square Foot |
| Mortar |
Mortarless |
Sand |
Gravel |
| Standard Modular |
3-3/4" x 7-1/2" x 2-1/4" |
5.0 |
4.5 |
5.2 |
.058 |
15 lbs. |
50 lbs. |
| 4 x 8 |
4" x 8" x 2-1/4" |
5.7-6.0 |
- |
4.5 |
- |
15 lbs. |
50 lbs. |
These values are actual quantities and must be
increased for waste and any possible construction requirements which
may necessitate additional quantities.
|
